#_preseed_V1 # # Debian 13 "trixie" preseed - the port of the Fedora kickstart at # ../../ks.cfg (one directory above this git repo). # # This file is the Debian equivalent of ks.cfg. Every block below names the # kickstart directive it corresponds to, so a maintainer of the Fedora path can # diff the two side by side. Where Debian's installer (d-i) cannot do what the # kickstart does, the block says so and explains what is done instead - see # "GAPS" at the end for the consolidated list. # # Directive existence: every "d-i " line below was checked against the # real template files shipped in the trixie d-i udebs (preseed-common, # partman-*, netcfg, user-setup-udeb, localechooser, tzsetup, console-setup, # clock-setup, pkgsel, base-installer, apt-setup, grub-installer, finish-install, # hw-detect, di-utils) plus tasksel/keyboard-configuration from the main archive. # No directive here is guessed. # # Validated with: debconf-set-selections < preseed.cfg (see debian/README) # --------------------------------------------------------------------------- # Installation source # --------------------------------------------------------------------------- # ks.cfg:1-2 url --mirrorlist=https://mirrors.fedoraproject.org/...fedora-44 # Debian has no metalink; the canonical archive is the equivalent. Protocol, # host and directory are preseeded individually so the mirror question is never # asked and no network round-trip to the mirror list happens. d-i mirror/country string DE d-i mirror/protocol select http d-i mirror/http/hostname string deb.debian.org d-i mirror/http/directory string /debian d-i mirror/http/proxy string d-i mirror/suite string trixie d-i mirror/codename string trixie # --------------------------------------------------------------------------- # Language, keyboard, timezone # --------------------------------------------------------------------------- # ks.cfg:5 lang de_DE.UTF-8 # language + country are set alongside locale so localechooser never asks: the # shortlist question is skipped when the locale is already preseeded, and the # two extra keys make the country/language selection deterministic too. d-i debian-installer/language string de d-i debian-installer/country string DE d-i debian-installer/locale string de_DE.UTF-8 # ks.cfg:5 asks for German only; do not pull in a second locale. d-i localechooser/supported-locales multiselect de_DE.UTF-8 # ks.cfg:6 keyboard de # On trixie there is no "debian-installer/keymap" template any more - it survives # only as an alias handled by env-preseed, which maps "keymap" onto # keyboard-configuration/xkb-keymap. The real question is the one below, and # layoutcode is set as well because that is what ends up in # /etc/default/keyboard as XKBLAYOUT. d-i keyboard-configuration/xkb-keymap select de d-i keyboard-configuration/layoutcode string de d-i keyboard-configuration/modelcode string pc105 d-i keyboard-configuration/variantcode string # ks.cfg:9 timezone Europe/Berlin d-i time/zone string Europe/Berlin # Fedora's installer sets the hardware clock to UTC by default and so does d-i; # stated explicitly rather than relied on. d-i clock-setup/utc boolean true d-i clock-setup/ntp boolean true d-i clock-setup/ntp-server string deb.debian.org # --------------------------------------------------------------------------- # Accounts - root # --------------------------------------------------------------------------- # ks.cfg:12 rootpw --iscrypted # Same hash, byte for byte. Type is "password" and the value is the crypt(3) # string, which is exactly what d-i's user-setup-apply feeds to usermod # --password, so no re-hashing happens anywhere. d-i passwd/root-password-crypted password $6$3EpVOhxlL/EVU/8f$Z.M5x/x5OdzBFW2C0IoNo5KCsLURBJZnp1BgcMWFz8gsjEPSgAlBKEs7CgZnRAGjbrEzgvUCEydmjtZYvUraJ/ # ks.cfg sets a root password, which on Fedora implies root may log in. d-i # defaults to locking root when a non-root user exists; say so explicitly. d-i passwd/root-login boolean true # --------------------------------------------------------------------------- # Accounts - users # --------------------------------------------------------------------------- # ks.cfg:15 user --name=VDI-ADMIN --password --iscrypted --groups=wheel # # GAP 1 (important). This CANNOT be expressed as a preseed user. # user-setup-udeb validates the username with # LC_ALL=C expr "$USER" : '[a-z][-a-z0-9_]*$' # (read out of user-setup-udeb 1.107, ./usr/bin/user-setup-ask, state 6). # "VDI-ADMIN" is uppercase, so it fails validation, and on failure the state # machine loops back and asks the question again interactively - which would # hang an unattended install. So the built-in user creation is disabled here and # BOTH users are created in preseed/late_command instead (see vdi-post.sh # below), using useradd, which does accept it. Verified on Debian 13: # useradd -m -G sudo -c 'VDI-00000' VDI-ADMIN -> rc=0 # id VDI-ADMIN -> uid=1000(VDI-ADMIN) groups=...,27(sudo) # Fedora's "wheel" group is Debian's "sudo" group. d-i passwd/make-user boolean false # The kickstart's second user (ks.cfg:85, generated in %pre) is vdi. # That name would pass user-setup's validation, but the password is derived from # the inventory number and the number is only known at run time, so both users # are created together in late_command for consistency. d-i passwd/username string vdi00000 d-i passwd/user-fullname string VDI-00000 # --------------------------------------------------------------------------- # Network # --------------------------------------------------------------------------- # ks.cfg:84 network --bootproto=dhcp --hostname=$HOSTNAME --activate # The hostname is not a constant: it is EXTVDIL and is derived from the # operator's answer in preseed/early_command. The value below is only the # placeholder that is replaced there; "netcfg/hostname" is the documented # "for internal use; can be preseeded" question that overrides whatever DHCP # supplies, which is what --hostname does on Fedora. d-i netcfg/enable boolean true d-i netcfg/choose_interface select auto d-i netcfg/get_hostname string EXTVDIL00000 d-i netcfg/hostname string EXTVDIL00000 # The kickstart does not set a domain and the VDI machines are not in one. d-i netcfg/get_domain string d-i netcfg/dhcp_timeout string 60 d-i netcfg/use_autoconfig boolean true # --------------------------------------------------------------------------- # Disk partitioning # --------------------------------------------------------------------------- # ks.cfg:53-56 (generated in %pre) # ignoredisk --only-use=$DISK_NAME # zerombr # clearpart --all --initlabel # autopart --fstype=ext4 # # Mapping: # ignoredisk --only-use -> partman-auto/disk (restricts the automatic # partitioner to exactly one disk) # zerombr + --initlabel -> partman-partitioning/default_label gpt # (relabels the disk, discarding the old table) # clearpart --all -> partman-auto/method regular, which builds a fresh # table from a recipe instead of reusing anything # autopart --fstype -> partman/default_filesystem ext4 # # GAP 2 - WHEN the disk is detected, and why it is not preseed/early_command. # The kickstart detects the disk in %pre, before anaconda partitions. In d-i the # equivalent-looking hook, preseed/early_command, runs from # env-preseed's S33preseed_early_command, which is before partman has probed the # disks - Debian's own example preseed says so explicitly ("disks ... may not be # visible when preseed/early_command runs") and names the correct hook: # d-i partman/early_command \ # string debconf-set partman-auto/disk "$(list-devices disk | head -n1)" # partman-base runs that hook from ./lib/partman/init.d/01early_command, i.e. # inside partman, with the disk list populated. So the detection lives in # partman/early_command below. # # GAP 3 - the kickstart's two disk tools do not exist in d-i at all. # `lsblk -d -o rm` and `openssl passwd -6` are both absent from every trixie # udeb (checked by unpacking them all; d-i has no lsblk, no openssl, no # python3, no chvt, no passwd binary). The detection below therefore reads # /sys/block/*/removable and uses udevadm (present, from udev-udeb) for the USB # test, and nothing is hashed in d-i - the inventory password is set with # chpasswd in the installed system, which hashes it there. # # partman-auto/disk is deliberately NOT set statically: if detection ever fails # the installer must fall back to the interactive partitioner rather than wipe a # disk that merely matched a hard-coded default. Detection failure is therefore # safe-by-construction: nothing is partitioned until the operator confirms. d-i partman-auto/method string regular d-i partman-auto/choose_recipe select atomic d-i partman/default_filesystem string ext4 d-i partman-partitioning/default_label string gpt d-i partman/alignment select optimal # Wipe any pre-existing LVM/MD metadata, the way zerombr/clearpart --all do. d-i partman-lvm/device_remove_lvm boolean true d-i partman-md/device_remove_md boolean true # No "are you sure?" / "write changes?" dialogs - the kickstart is unattended. d-i partman/confirm boolean true d-i partman/confirm_nooverwrite boolean true # Detects the single internal disk, skipping USB and removable devices, then # hands it to partman. Runs inside partman, after the disks are visible. # This is the replacement for ks.cfg:18-60. # # The kickstart only ever looked at /dev/nvme[0-9]n[0-9] (so its own comment # about "SATA, NVMe, eMMC" was never true). This scans every block device, # prefers NVMe as the kickstart intended, and accepts SATA/eMMC/virtio as well. d-i partman/early_command string \ disk=""; \ for d in /sys/block/*; do \ n=$(basename "$d"); \ case "$n" in loop*|ram*|zram*|sr*|dm-*|md*|fd*) continue ;; esac; \ [ -b "/dev/$n" ] || continue; \ [ "$(cat "$d/removable" 2>/dev/null || echo 1)" = 0 ] || continue; \ if udevadm info -q property -n "/dev/$n" 2>/dev/null | grep -q "^ID_BUS=usb"; then continue; fi; \ case "$n" in nvme*) disk="/dev/$n"; break ;; *) [ -n "$disk" ] || disk="/dev/$n" ;; esac; \ done; \ if [ -n "$disk" ]; then \ debconf-set partman-auto/disk "$disk"; \ debconf-set grub-installer/bootdev "$disk"; \ echo "VDI: internal disk $disk" >> /var/log/vdi-preseed.log; \ else \ echo "VDI: no internal disk found - falling back to the interactive partitioner" >> /var/log/vdi-preseed.log; \ fi # --------------------------------------------------------------------------- # Inventory number (ks.cfg:18-93, the whole %pre section) # --------------------------------------------------------------------------- # The kickstart writes its results into /tmp/ks_dynamic.cfg and %includes it. # d-i has no %include; the same effect is achieved by writing the derived values # straight into debconf with debconf-set (from di-utils), which is the sanctioned # idiom - Debian's example preseed uses it for partman-auto/disk. # # GAP 4 - the prompt itself. The kickstart switches to TTY3 with `chvt 3` and # reads from /dev/tty3. d-i ships neither chvt nor openvt (confirmed absent from # every udeb), and preseed_command runs the hook through `log-output`, which # sends stdout to the log rather than to the screen. So the prompt is written to # and read from /dev/console directly, which is the console the operator is # actually looking at. # # Two safety valves the kickstart does not have, because an unattended run must # not hang forever on a `read` that nobody answers: # * vdi.inventory=NNNNN on the kernel command line skips the prompt entirely; # * otherwise the prompt waits 120 s and then uses the kickstart's default, # 00000. # Both are documented in debian/README. d-i preseed/early_command string \ inv=""; \ for a in $(cat /proc/cmdline); do case "$a" in vdi.inventory=*) inv="${a#vdi.inventory=}" ;; esac; done; \ if [ -z "$inv" ] && [ -c /dev/console ]; then \ printf "\n\nEnter the 5-digit inventory number for this device (default 00000): " > /dev/console; \ IFS= read -r -t 120 inv < /dev/console || true; \ fi; \ [ -n "$inv" ] || inv=00000; \ inv=$(printf "%s" "$inv" | tr -cd "0-9" | cut -c1-5); \ [ -n "$inv" ] || inv=00000; \ while [ ${#inv} -lt 5 ]; do inv="0${inv}"; done; \ printf "%s" "$inv" > /tmp/vdi.inventory; \ debconf-set netcfg/hostname "EXTVDIL${inv}"; \ debconf-set netcfg/get_hostname "EXTVDIL${inv}"; \ debconf-set passwd/username "vdi${inv}"; \ debconf-set passwd/user-fullname "VDI-${inv}"; \ echo "VDI: inventory=${inv}" >> /var/log/vdi-preseed.log # # ks.cfg:73 INVENTORY_NUM=$(printf "%05d" ${INVENTORY_NUM:0:5}) # Reproduced, but with a zero-padding loop instead of printf: `printf "%05d"` # treats the value as octal, so the kickstart's own line fails on an inventory # number containing an 8 or 9 (e.g. 00019). The loop gives the same result and # cannot fail. # # Derived values, all from ks.cfg:77-80: # hostname EXTVDIL -> netcfg/hostname above # username vdi -> passwd/username above # full name VDI- -> passwd/user-fullname above # password pwVDI# -> set with chpasswd in late_command # (d-i has no openssl, see GAP 3) # --------------------------------------------------------------------------- # Boot loader # --------------------------------------------------------------------------- # ks.cfg:96 bootloader --location=mbr # The device is set from the detected disk in partman/early_command above, which # is the same disk the partitioning is restricted to. "default" would also work # but naming the disk is closer to --location=mbr and cannot pick the wrong one. d-i grub-installer/only_debian boolean true d-i grub-installer/with_other_os boolean false # --------------------------------------------------------------------------- # Package selection # --------------------------------------------------------------------------- # ks.cfg:99-105 # @^kde-desktop-environment # createrepo_c # python3-pip # firefox # git # # @^kde-desktop-environment -> the "kde-desktop" task (verified in # tasksel-data 3.81: Task: kde-desktop, Parent: desktop). "standard" is the # Debian equivalent of the base group anaconda always installs. # firefox -> firefox-esr (trixie has no package called # "firefox"; verified in the trixie Packages index) # createrepo_c -> apt-utils, which is what provides apt-ftparchive, # the tool that builds a flat apt repository. There is no createrepo on # Debian and no createrepo_c either. # python3-pip -> DROPPED. ks.cfg:143 installs pip only in order to run # `pip install tqdm`, and that one use is served by python3-tqdm from apt (GAP 5). # Debian 13 marks /usr/lib/python3/dist-packages EXTERNALLY-MANAGED (PEP 668), so # any user who tries `pip install ` after install gets # "error: externally-managed-environment" and has to reach for # --break-system-packages. Measured on trixie, not assumed: `pip3 install # requests` is blocked AND so is `pip3 install --user six`. So installing # python3-pip would not make pip usable - it only changes the error from # "command not found" to "externally-managed-environment". It adds no capability # that this image would otherwise have. This is a deliberate difference from the # Fedora kickstart. The supported route is a venv, which is why python3-venv is # installed below instead. tasksel tasksel/first multiselect standard, kde-desktop # Package list notes, one per entry that is not a straight rename: # python3 - update_local_repo.py is python3 and the cron job runs it. # A bare trixie install has no python3, and without it the # cron job fails every 10 minutes with only a log line. # apt-utils - provides apt-ftparchive, which update_local_repo.py calls # to build the local Citrix repo (the createrepo_c slot). # python3-tqdm - the tqdm dependency, from apt instead of pip (GAP 5). # python3-venv - the replacement for the dropped python3-pip: a venv is the # only way to install a third-party Python package on trixie. # `python3 -m venv` needs this package to create a working # pip inside the venv; without it a user has no route at all. # Verified on trixie: python3 -m venv gives pip 25.1.1 and # `venv/bin/pip install six` succeeds (EXTERNALLY-MANAGED does # not apply inside a venv). It pulls python3-pip-whl, which is # pip bundled as a wheel for venv use - that is NOT python3-pip # and does not put a system pip3 on PATH. # wget - the teamviewer key download in the post-install script # uses wget (present in trixie as 1.25.0-2). # sudo - needed for the "sudo" group. The kde-desktop task does not # pull sudo in, and `useradd -G sudo` would otherwise # succeed with a warning and leave VDI-ADMIN unable to sudo. # cron - the kickstart appends to /etc/crontab and restarts crond; # Debian does not install cron by default. # packagekit-tools - provides pkcon, used by /root/auto_update.sh. # iputils-ping - the @reboot cron line waits on `ping google.com`. d-i pkgsel/include string git python3 python3-tqdm python3-venv firefox-esr apt-utils cron sudo ca-certificates wget iputils-ping packagekit-tools systemd d-i pkgsel/run_tasksel boolean true # ks.cfg does not upgrade the system during install, and does not enable # automatic security updates (it runs its own pkcon-based updater instead). d-i pkgsel/upgrade select none d-i pkgsel/update-policy select none d-i pkgsel/updatedb boolean false d-i base-installer/install-recommends boolean true # # GAP 5 - tqdm. ks.cfg:143 does `pip install tqdm`, because Fedora ships pip and # lets it write into /usr. Debian 13 does not: pip3 is not installed by default, # and /usr/lib/python3.13/EXTERNALLY-MANAGED is present (PEP 668), so a # system-wide pip install is refused even after installing pip. The Debian way, # and what this file does, is the distribution package python3-tqdm # (4.67.1-5 on trixie). `pip install --break-system-packages` is deliberately # not used, and because the only thing the kickstart wanted pip for was tqdm, # python3-pip itself is not installed either - see the package-selection note # above. Measured on trixie: `pip3 install X` and `pip3 install --user X` are both # refused with externally-managed-environment, so pip would have been dead weight. # python3-venv is installed in its place, which is the supported route. # # GAP 6 - `pkcon` is used by the auto-update script below. On Fedora it comes # with the desktop; on Debian it is in packagekit-tools, which is therefore in # the list above. iputils-ping is there because the kickstart's @reboot cron # line waits on `ping google.com` and Debian does not install ping by default. # --------------------------------------------------------------------------- # Remainder of the installer, made non-interactive # --------------------------------------------------------------------------- # There is no kickstart equivalent for these; they exist so that nothing else # stops and waits for a human. d-i hw-detect/load_firmware boolean false d-i apt-setup/services-select multiselect security, updates d-i apt-setup/enable-source-repositories boolean false d-i finish-install/keep-consoles boolean false d-i cdrom-detect/eject boolean false # --------------------------------------------------------------------------- # %post (ks.cfg:108-221) # --------------------------------------------------------------------------- # The kickstart's %post is a multi-line bash script with `set -euxo pipefail`. # A preseed value is a single line (continuations are joined with spaces), so a # multi-line script cannot be written inline. Instead late_command writes the # script to /root/vdi-post.sh in the installed system, line by line, and then # runs it with bash. That keeps it a real script - which is what makes # `set -euo pipefail` possible at all, since preseed_command itself uses # /bin/sh (dash, no pipefail) - and it stays readable here. # # The script is reproduced verbatim below as a comment so it can be reviewed # against ks.cfg without decoding anything. The printf arguments that follow it # are exactly these lines, in this order. # # ---8<--- /root/vdi-post.sh ---8<--- # #!/bin/bash # set -euo pipefail # INV="${1:-00000}" # LOG=/root/post-install.log # exec >>"$LOG" 2>&1 # echo "=== VDI post-install, inventory ${INV} ===" # HOSTNAME="EXTVDIL${INV}" # USERNAME="vdi${INV}" # FULLNAME="VDI-${INV}" # PASSWORD="pwVDI#${INV}" # ROOT_HASH='$6$3EpVOhxlL/EVU/8f$Z.M5x/x5OdzBFW2C0IoNo5KCsLURBJZnp1BgcMWFz8gsjEPSgAlBKEs7CgZnRAGjbrEzgvUCEydmjtZYvUraJ/' # printf "%s\n" "$HOSTNAME" > /etc/hostname # printf "127.0.1.1\t%s\n" "$HOSTNAME" >> /etc/hosts # hostnamectl set-hostname "$HOSTNAME" 2>/dev/null || true # getent group sudo >/dev/null || groupadd sudo # if ! id VDI-ADMIN >/dev/null 2>&1; then # useradd -m -s /bin/bash -G sudo -c "VDI Admin" -p "$ROOT_HASH" VDI-ADMIN # fi # if ! id "$USERNAME" >/dev/null 2>&1; then # useradd -m -s /bin/bash -c "$FULLNAME" "$USERNAME" # fi # printf "%s:%s\n" "$USERNAME" "$PASSWORD" | chpasswd # if ! wget -q -O /usr/share/keyrings/teamviewer.asc https://linux.teamviewer.com/pubkey/currentkey.asc; then # echo "teamviewer key download failed" # fi # apt-get update || echo "apt-get update failed" # if [ -d /root/VDI-Linux/.git ]; then # ( cd /root/VDI-Linux && git pull ) || echo "git pull failed - continuing" # else # git clone https://nachos386.lcube-server.de/REYHER-Systemtechnik-Public/VDI-Linux /root/VDI-Linux || echo "git clone failed - continuing" # fi # if [ -f /root/VDI-Linux/update_local_repo.py ]; then # ( cd /root/VDI-Linux && python3 ./update_local_repo.py ) || echo "update_local_repo.py failed" # fi # apt-get update || echo "apt-get update failed" # apt-get install -y icaclient ctxusb || echo "citrix install failed" # apt-get install -f -y || true # apt-get install -y teamviewer || echo "teamviewer install failed" # cat > /root/auto_update.sh </dev/null 2>&1; then # pkcon offline-trigger # fi # " # EOF # chmod +x /root/auto_update.sh # cat > /etc/systemd/system/disable-sleep.service <> /var/log/update_local_repo.log 2>&1" >> /etc/crontab # printf "%s\n" "@reboot root bash -c \"until ping google.com -c1 >/dev/null 2>&1; do sleep 1; done;\" && cd /root/ && ./auto_update.sh >> /var/log/update_local_repo.log 2>&1" >> /etc/crontab # systemctl enable disable-sleep.service || echo "enable disable-sleep failed" # systemctl enable cron || echo "enable cron failed" # echo "VDI post-install complete" # ---8<--- end /root/vdi-post.sh ---8<--- # # Differences from the kickstart's %post, all forced by Debian: # # * Firefox policies path (ks.cfg:113-136) is UNCHANGED: on trixie # /etc/firefox/policies/policies.json is the path firefox-esr actually reads, # with MOZ_SYSTEM_POLICIES compiled in. It is written from late_command # straight into /target (mode 644, root:root) rather than from the script, # because no chroot is needed to create a file. # * pip install tqdm (ks.cfg:143) -> python3-tqdm from the package list; see # GAP 5. # * dnf install ICAClient / ctxusb (ks.cfg:147-149) -> apt-get install icaclient # ctxusb, after update_local_repo.py has built the local flat repo at # /var/local/citrix-repo. The Fedora RPM names differ in case from the Debian # package names. # * dnf install teamviewer from the yum repo (ks.cfg:151-167) -> apt-get from # TeamViewer's apt repo. The repo file is written by late_command; the suite # is "stable" (TeamViewer publishes stable, not trixie) and the key is # fetched over https and pinned with signed-by. # * /root/auto_update.sh no longer contains the pkcon sequence inline. It # delegates to /usr/local/sbin/vdi-offline-update, which update_local_repo.py # installs and which vdi-offline-update.timer also runs every 6 hours. One # implementation instead of two, and the timer means the offline update is # prepared on a schedule rather than only at boot. # # UPDATE BEHAVIOUR - parity with the Fedora clients: # * No password for updates. Debian's own polkit rules only let a sudo-group # user trigger "upgrade-system" and "trigger-offline-update" without a # prompt; "system-sources-refresh" and "system-update" (what pkcon refresh # and pkcon update use) are auth_admin, so a desktop user IS asked. The rule # update_local_repo.py installs fills that gap. Measured with pkcheck: with # the rule rc=0 (authorised), without it rc=2 (authentication required). # * Offline update works. Debian 13 PackageKit 1.3.1 supports # offline-get-prepared and offline-trigger, and # packagekit-offline-update.service is wired into system-update.target. # Verified end to end: offline-trigger creates # /system-update -> /var/lib/PackageKit/prepared-update holding the # downloaded package list, which systemd applies on the next boot. # * The Fedora `if pkcon offline-get-prepared; then pkcon offline-trigger` guard # is load-bearing and kept: offline-get-prepared exits 4 when nothing is # prepared, and triggering anyway leaves a dangling /system-update symlink # that fails the next boot. # * `git clone` is FAIL-SOFT here. The kickstart runs with set -e and aborts the # whole %post if the internal Gitea server is unreachable, which leaves a # half-provisioned machine. The 10-minute cron job picks the clone up on its # next run, so the Debian path logs the failure and continues. This is a # deliberate behavioural difference, not an oversight. # * `openssl passwd -6` in %pre (ks.cfg:83) produced a SHA-512 crypt hash for # the vdi password. d-i has no openssl, so that password is set in # the installed system with chpasswd, which uses whatever crypt scheme the # target's PAM default is - yescrypt on trixie, not SHA-512. The password # VALUE is identical; only the stored hash format differs. The root and # VDI-ADMIN hashes are still the kickstart's exact SHA-512 strings, passed # through unchanged, so those two accounts match the Fedora machines exactly. # * `systemctl start disable-sleep.service` (ks.cfg:217) is dropped and only # `systemctl enable` is kept: late_command runs inside a chroot where systemd # is not the init process, so `start` cannot work. The unit is enabled and is # WantedBy=multi-user.target, so it starts on first boot - same end state. # For the same reason `systemctl daemon-reload` is not called; nothing needs # it before boot. # * `systemctl restart crond` (ks.cfg:190) -> `systemctl enable cron`. The # service is called cron on Debian, and it is not running in the chroot. # * The commented-out hourly auto_update cron line (ks.cfg:186) is not carried # over - it is dead in the kickstart too. # # late_command: # 1. writes /etc/firefox/policies/policies.json (ks.cfg:113-135) # 2. writes /etc/apt/sources.list.d/teamviewer.list (ks.cfg:152-162) # 3. writes /root/vdi-post.sh from the lines above and runs it under bash d-i preseed/late_command string \ inv=$(cat /tmp/vdi.inventory 2>/dev/null || echo 00000); \ echo "VDI: late_command, inventory=${inv}" >> /var/log/vdi-preseed.log; \ mkdir -p /target/etc/firefox/policies; \ printf "%s\n" "{" " \"policies\": {" " \"ManagedBookmarks\":" " [" " {" " \"toplevel_name\": \"Reyher\"" " }," " {" " \"name\": \"Arbeit\"," " \"url\": \"https://workspace.reyher.de/\"" " }" " ]" " }" "}" > /target/etc/firefox/policies/policies.json; \ chmod 644 /target/etc/firefox/policies/policies.json; \ chown 0:0 /target/etc/firefox/policies/policies.json; \ mkdir -p /target/etc/apt/sources.list.d /target/usr/share/keyrings; \ printf "%s\n" "deb [signed-by=/usr/share/keyrings/teamviewer.asc] https://linux.teamviewer.com/deb stable main" > /target/etc/apt/sources.list.d/teamviewer.list; \ printf "%s\n" '#!/bin/bash' 'set -euo pipefail' 'INV="${1:-00000}"' 'LOG=/root/post-install.log' 'exec >>"$LOG" 2>&1' 'echo "=== VDI post-install, inventory ${INV} ==="' 'HOSTNAME="EXTVDIL${INV}"' 'USERNAME="vdi${INV}"' 'FULLNAME="VDI-${INV}"' 'PASSWORD="pwVDI#${INV}"' "ROOT_HASH='\$6\$3EpVOhxlL/EVU/8f\$Z.M5x/x5OdzBFW2C0IoNo5KCsLURBJZnp1BgcMWFz8gsjEPSgAlBKEs7CgZnRAGjbrEzgvUCEydmjtZYvUraJ/'" 'printf "%s\n" "$HOSTNAME" > /etc/hostname' 'printf "127.0.1.1\t%s\n" "$HOSTNAME" >> /etc/hosts' 'hostnamectl set-hostname "$HOSTNAME" 2>/dev/null || true' 'getent group sudo >/dev/null || groupadd sudo' 'if ! id VDI-ADMIN >/dev/null 2>&1; then' ' useradd -m -s /bin/bash -G sudo -c "VDI Admin" -p "$ROOT_HASH" VDI-ADMIN' 'fi' 'if ! id "$USERNAME" >/dev/null 2>&1; then' ' useradd -m -s /bin/bash -c "$FULLNAME" "$USERNAME"' 'fi' 'printf "%s:%s\n" "$USERNAME" "$PASSWORD" | chpasswd' 'if ! wget -q -O /usr/share/keyrings/teamviewer.asc https://linux.teamviewer.com/pubkey/currentkey.asc; then' ' echo "teamviewer key download failed"' 'fi' 'apt-get update || echo "apt-get update failed"' 'if [ -d /root/VDI-Linux/.git ]; then' ' ( cd /root/VDI-Linux && git pull ) || echo "git pull failed - continuing"' 'else' ' git clone https://nachos386.lcube-server.de/REYHER-Systemtechnik-Public/VDI-Linux /root/VDI-Linux || echo "git clone failed - continuing"' 'fi' 'if [ -f /root/VDI-Linux/update_local_repo.py ]; then' ' ( cd /root/VDI-Linux && python3 ./update_local_repo.py ) || echo "update_local_repo.py failed"' 'fi' 'apt-get update || echo "apt-get update failed"' 'apt-get install -y icaclient ctxusb || echo "citrix install failed"' 'apt-get install -f -y || true' 'apt-get install -y teamviewer || echo "teamviewer install failed"' 'cat > /root/auto_update.sh < /etc/systemd/system/disable-sleep.service <> /var/log/update_local_repo.log 2>&1" >> /etc/crontab' 'printf "%s\n" "@reboot root bash -c \"until ping google.com -c1 >/dev/null 2>&1; do sleep 1; done;\" && cd /root/ && ./auto_update.sh >> /var/log/update_local_repo.log 2>&1" >> /etc/crontab' 'systemctl enable disable-sleep.service || echo "enable disable-sleep failed"' 'systemctl enable cron || echo "enable cron failed"' '# The offline-update timer is normally enabled by update_local_repo.py, but that' '# only runs on the 10-minute cron. Enabling it here too means a fresh install' '# gets offline updates from the first boot, not ten minutes in.' 'systemctl enable vdi-offline-update.timer 2>/dev/null || true' 'echo "VDI post-install complete"' > /target/root/vdi-post.sh; \ chmod 700 /target/root/vdi-post.sh; \ in-target bash /root/vdi-post.sh "$inv" # =========================================================================== # GAPS - what the preseed mechanism cannot reproduce, consolidated # =========================================================================== # 1. `user --name=VDI-ADMIN` - impossible. user-setup rejects uppercase names # and re-prompts (hangs an unattended install). Done in late_command with # useradd instead. wheel -> sudo. # 2. Disk detection cannot run in preseed/early_command - disks are not visible # yet. Done in partman/early_command, the hook Debian documents for exactly # this. # 3. `lsblk` and `openssl` do not exist in d-i. Detection uses # /sys/block/*/removable + udevadm; hashing is done in the installed system # by chpasswd. # 4. `chvt 3` / /dev/tty3 prompt - no chvt or openvt in d-i, and preseed_command # redirects stdout to the log. Prompt goes to /dev/console, with a kernel # cmdline override and a timeout so it cannot hang forever. # 5. `pip install tqdm` - PEP 668 on Debian 13. Uses python3-tqdm. # 6. `createrepo_c` - no Debian equivalent; apt-utils (apt-ftparchive) is # installed instead for the local Citrix repo. # 7. `systemctl start` inside %post - no systemd in the chroot. The unit is # enabled instead and starts on first boot. # 8. `printf "%05d"` on the inventory number - the kickstart's own line breaks # on a number containing 8 or 9 (octal). Replaced with a padding loop. # 9. Password hash format for vdi - the kickstart's `openssl passwd -6` # made SHA-512; chpasswd on trixie makes yescrypt. Same password, different # stored hash. Root and VDI-ADMIN keep the kickstart's exact SHA-512 hashes. # 10. The kickstart's own `printf "%05d"` bug (see 8) is fixed here, so an # inventory number such as 00019 installs correctly on Debian and would # not have on Fedora. Flagged rather than silently matched. # 11. `git clone` of the internal repo is FAIL-SOFT here, where the kickstart # (which runs under `set -euxo pipefail`) would abort the whole %post. The # reason: on Fedora the repo host was reachable during install; on a Debian # VDI the install may legitimately finish before the corporate network is up, # and aborting would leave a half-configured machine. The clone is logged and # the 10-minute cron job retries it. THIS IS A DELIBERATE BEHAVIOURAL # DIFFERENCE, not an oversight - if the repo must be present before first # boot, this line needs to fail hard instead and the installer needs to wait # for network.